A sliding door system is the complete set of parts that lets glass panels slide past each other: the aluminium frame and sash profiles, the tracks, the rollers, the interlock where panels meet, the seals and the lock. Buying a system rather than separate parts is what makes the door run smoothly and seal properly. This guide explains each part and how to choose between the main system types.

Aluminium sliding door system with a flush floor track
150 series sliding door system with a flush track.

Parts of a sliding door system

Part What it does
Frame profiles Top track, bottom track and side jambs fixed into the opening
Sash profiles The aluminium frame around each glass panel
Interlock The meeting stile where two panels overlap; its width sets the sightline
Rollers Carry the panel weight on the bottom track
Seals and brushes Keep out wind, water and dust
Lock Hook lock or multi-point lock on the sash stile
Diagram of the parts of an aluminium sliding door system
The main parts of a two-panel sliding door system.

Types of sliding door systems

System Tracks Best for Example
Slimline 2 or 3 Balconies, kitchens, partitions 40 series: 18 mm interlock, 106 or 159 mm frame
Panoramic 2 to 5 Large openings, floor-to-ceiling glass 150 series: 25 mm interlock, sash up to 3.5 × 6 m
Lift and slide 2 or more Heavy panels with tight sealing Lift track on the 40 series
Interior track Unlimited linked panels Room dividers, glass partitions NICE and Perfect systems

We compare our three systems side by side on the sliding door profile page.

40 series sliding door system with 8 track options
The 40 series offers 8 track systems.

Track options

Flush, raised and embedded sliding door track options
Flush, raised and embedded tracks.

Rollers and panel weight

Double-row rollers carry more weight and run more steadily than single-row rollers. On the 40 series, a 4-wheel double-row roller has a recommended load of up to 50 kg and a 12-wheel roller up to 130 kg. The 150 series panoramic system uses dual-row rollers rated up to 170 kg per roller set. Check the panel weight, glass included, before choosing a system.

Dual-row bottom rollers of a panoramic sliding door system
Dual-row bottom rollers on the 150 series.

Choosing a sliding door system

MT Flying supplies complete sliding door systems from its Foshan factory: profiles, rollers, locks and seals in one order. See 40 series slimline sliding door, 150 series panoramic profiles, the finished aluminium sliding doors and our guide to sliding door components.

Frequently asked questions

What is included in a sliding door system?

Frame and sash profiles, tracks, rollers, interlocks, seals and a lock. Ordering them as one system ensures the parts fit.

How many tracks can a sliding door system have?

Slimline systems usually run on 2 or 3 tracks. Panoramic systems can have 2 to 5 tracks, and interior systems can link an unlimited number of panels.

Can a sliding door system be motorized?

Yes. The 40 series is upgraded by replacing the upper track, and the 150 series panoramic system has motorized kits.

Need a quotation? MT Flying is a top 5 aluminum factory in China. Send your drawings or profile list through our contact page and we reply with sections, price and lead time.

Leave a Reply

Your email address will not be published. Required fields are marked *