Every sliding glass door is built from the same family of sliding patio door components. Knowing the names and quantities helps when you order a full kit, replace a worn part or compare two suppliers. The quantities below use W for door width and H for door height, as on a factory cut list.
Profile components
| Component | Function | Typical quantity |
|---|---|---|
| Top track | Guides the top of each panel | W |
| Bottom track | Carries the rollers; often with drainage | W |
| Side jamb or side seal | Closes the frame at each side | 2H |
| Sash top and bottom rails | Top and bottom of each panel | W per rail |
| Sash stile | Vertical side of each panel; takes the lock | H per stile |
| Interlock | Meeting stile where panels overlap | 2H for a 2-panel door |
| Glazing bead and gasket | Hold and seal the glass | Per panel perimeter |

Hardware components
- Rollers: single-row or double-row; double-row carry more weight
- Lock: one-side hook lock, flush handle lock or pull handle with key cylinder
- Handles: flush pull or lever handle
- Seals and brushes: weather seals along the interlock and tracks
- Stoppers and anti-lift blocks: stop the panel at the end of travel and prevent lifting out
- Corner keys and screws: join the mitred or butt-jointed sash corners


Example: 40 series double-track kit
On the 40 series slimline sliding door, a two-track door uses a 106 mm frame and 4H + 2W of sash profile per door. A three-track door uses a 159 mm frame, 6H + 2W of sash and 4H of the 18 mm interlock. The standard lock is a 14 mm one-side lock in silver or black. The full section codes and accessory set are on the 40 series sliding door page.

What to check when ordering
- All components come from the same system, so tracks, rollers and sashes fit
- Roller load rating against the real panel weight, glass included
- Track height: flush for access, raised for sealing
- Lock type and finish
- Whether accessories are packed with the profiles
MT Flying packs rollers, locks, seals and fittings with its sliding door profiles, so one order covers the complete door. Compare systems on the sliding door profile page, or read how a sliding door system fits together.

Frequently asked questions
What are the main components of a sliding patio door?
Top and bottom tracks, side jambs, sash rails and stiles, the interlock, rollers, a lock, seals and corner fittings.
Can I replace only the rollers on a sliding door?
Often yes, if you can match the roller size and type to the bottom track. The safest way is to order rollers from the same system as the profiles.
Do you sell sliding door components as a kit?
Yes. MT Flying supplies profiles with matching rollers, locks and seals for each system.
Need a quotation? MT Flying is a top 5 aluminum factory in China. Send your drawings or profile list through our contact page and we reply with sections, price and lead time.