Every sliding glass door is built from the same family of sliding patio door components. Knowing the names and quantities helps when you order a full kit, replace a worn part or compare two suppliers. The quantities below use W for door width and H for door height, as on a factory cut list.

Profile components

Component Function Typical quantity
Top track Guides the top of each panel W
Bottom track Carries the rollers; often with drainage W
Side jamb or side seal Closes the frame at each side 2H
Sash top and bottom rails Top and bottom of each panel W per rail
Sash stile Vertical side of each panel; takes the lock H per stile
Interlock Meeting stile where panels overlap 2H for a 2-panel door
Glazing bead and gasket Hold and seal the glass Per panel perimeter
Labelled sliding patio door components
Where each component sits in the door.

Hardware components

Sliding door rollers on the bottom track
Rollers carry the panel on the bottom track.
Standard 14 mm one-side lock for a sliding door
Standard 14 mm one-side lock.

Example: 40 series double-track kit

On the 40 series slimline sliding door, a two-track door uses a 106 mm frame and 4H + 2W of sash profile per door. A three-track door uses a 159 mm frame, 6H + 2W of sash and 4H of the 18 mm interlock. The standard lock is a 14 mm one-side lock in silver or black. The full section codes and accessory set are on the 40 series sliding door page.

Assembly diagram of a 40 series double-track sliding door
40 series double-track assembly.

What to check when ordering

MT Flying packs rollers, locks, seals and fittings with its sliding door profiles, so one order covers the complete door. Compare systems on the sliding door profile page, or read how a sliding door system fits together.

Flush handle lock option for a sliding patio door
Flush handle lock option.

Frequently asked questions

What are the main components of a sliding patio door?

Top and bottom tracks, side jambs, sash rails and stiles, the interlock, rollers, a lock, seals and corner fittings.

Can I replace only the rollers on a sliding door?

Often yes, if you can match the roller size and type to the bottom track. The safest way is to order rollers from the same system as the profiles.

Do you sell sliding door components as a kit?

Yes. MT Flying supplies profiles with matching rollers, locks and seals for each system.

Need a quotation? MT Flying is a top 5 aluminum factory in China. Send your drawings or profile list through our contact page and we reply with sections, price and lead time.

Leave a Reply

Your email address will not be published. Required fields are marked *