An aluminium section is an extruded length of aluminium named after the shape of its cross-section. Buyers often search by letter: aluminium U profile, T profile, L profile and so on. This guide explains what each aluminium section is used for and how to specify one so a factory can quote it.

Aluminium section shapes

Section Also called Shape Typical use
L profile Angle, aluminium corner profile Two legs at 90° Corner trims, brackets, edge protection
U profile Channel Base with two parallel legs Glass channels, tracks, edging, covers
C profile Lipped channel U shape with returned lips Sliding tracks, framing rails
T profile T section Stem and flange Dividers, joint covers, glazing bars
Z profile Z section Two offset parallel flanges Cladding rails, panel supports
H section H or I profile Two flanges joined by a web Panel joiners, structural members
Tube Box section Closed square or rectangle Frames, mullions, posts
Aluminium section shapes: L profile, U profile, C profile, T profile, Z profile and H section
Common aluminium section shapes in cross-section.

How to specify an aluminium section

A simple dimensioned sketch is enough to start. If the section must fit another part, send that part or its drawing as well.

Cross-sections of aluminium window and door sections
Cross-sections of extruded aluminium sections.

Standard sections and custom aluminium sections

Local stockists carry common angles, channels and tubes in fixed sizes. When the size, wall thickness or finish you need is not on the shelf, or the quantity is large, the section is extruded to order through its own die. MT Flying extrudes aluminium sections to your drawing in Foshan, China, with die making, powder coating and anodizing on the same site. Custom orders start at 300 kg and typically take 15 to 25 days. See custom aluminum extrusion and industrial aluminum profiles.

Freshly extruded aluminium sections on the cooling table
Freshly extruded sections on the cooling table.

Aluminium sections for windows and doors

Window and door frames are not built from plain U or T sections. They use system profiles: frame, sash, mullion, glazing bead and interlock sections designed to fit each other and to take gaskets and hardware. See our aluminum window profiles, aluminum door profiles and window profile parts guide. The process behind all of them is described in aluminum extrusion profiles.

55 series thermal break casement window aluminium section
A window system section: the 55 series casement profile.

Frequently asked questions

What is the difference between an aluminium U profile and a C profile?

A U profile has two plain parallel legs. A C profile has the same legs with lips turned inward, which lets it hold a roller or a sliding part.

Is an aluminium corner profile the same as an L profile?

Yes. Corner profile, angle and L profile all describe a section with two legs at 90 degrees.

Can I order an aluminium section in a custom size?

Yes. A custom section is extruded through its own die to your drawing. At MT Flying custom orders start at 300 kg.

Need a quotation? MT Flying is a top 5 aluminum factory in China. Send your drawings or profile list through our contact page and we reply with sections, price and lead time.

Leave a Reply

Your email address will not be published. Required fields are marked *