Foshan, Guangdong · Since 2010
MT Flying is a top 5 aluminum factory in China and a powder coating factory that extrudes and coats its own aluminum profiles on one site in Foshan. Horizontal and vertical powder coating lines run beside more than 30 extrusion lines, so window, door and custom profiles leave the factory extruded, coated, packed and ready to fabricate.
Request a QuoteWhatsApp Us
Many buyers looking for a powder coating factory in China end up managing two suppliers: one that extrudes the aluminum and one that coats it. At MT Flying both steps happen on the same site, under one order and one inspection plan.
The profile is extruded in 6063-T5 in our aluminum extrusion factory, moved to the coating line, finished and packed without leaving the factory. That is how one color stays consistent across the frames, sashes, beads and trims of a single order.
Profiles hang horizontally from the overhead conveyor as they pass through pretreatment, the spray booth and the curing oven. This layout is typically used for shorter runs, mixed sections and orders with frequent color changes.
Profiles hang upright and move through the line in a continuous flow. This layout is typically used for long profiles and large single-color runs.
| Location | Ma’angang Industrial Zone, Shishan Town, Nanhai District, Foshan, Guangdong, China |
|---|---|
| Substrate | 6063-T5 aluminum extrusions made in the same factory |
| Coating lines | Horizontal and vertical powder coating lines |
| Colors | Stock colors, or custom colors from 300 kg |
| Surfaces | Matte, gloss, textured and metallic |
| Dual color | Different inside and outside colors on thermal break profiles |
| Coastal option | Architectural TIGER Drylac powder with enhanced seaside pretreatment, evaluated per project |
| Other finishes on site | Anodizing (AA20 and AA25 for coastal projects) and wood grain transfer |
| Products | Window, door, curtain wall, cabinet, industrial and custom aluminum profiles |
| Lead time | Stock profiles from 1 day; custom colors or sections typically 15 to 25 days |
| Certificates | ISO 9001:2015; SGS RoHS test report for 6063 aluminum profiles |
See the documents on our certificates page.
Most of what runs through the coating lines is architectural profile: frames, sashes, mullions, beads and trims for windows and doors, plus curtain wall, cabinet and industrial sections.
If a metallic surface that cannot peel suits the project better, compare anodized profiles. For a timber look, see wood grain profiles.
How long a powder coated finish lasts depends on pretreatment, film build, curing and how harsh the site is. For buildings close to the sea we normally evaluate an architectural TIGER Drylac powder system with enhanced seaside pretreatment. Our guide to powder coating vs anodizing for coastal aluminum windows explains the trade-offs.
If your specification names a coating standard, such as Qualicoat, AAMA 2604 or 2605, or GB/T 5237.4, include it in the enquiry. We will confirm the powder system and the test documents we can supply for that order before production starts.
Send us:
We reply with sections, price and lead time. When color matching matters, agree a coated sample before production.
You are welcome to see the lines running. The factory is about 40 minutes from the Canton Fair, and our Activity Center explains the factory visit subsidy. More about the company is on the About Us page.
A factory. MT Flying has made aluminum profiles in Foshan, China since 2010 and runs extrusion, die making, powder coating and warehousing on one 200,000 m² site.
Custom colors start at 300 kg and typically take 15 to 25 days. Stock profiles have no minimum order and can ship from 1 day.
On the horizontal line profiles hang horizontally from the overhead conveyor, a layout typically used for shorter runs and frequent color changes. On the vertical line profiles hang upright and pass through pretreatment, spraying and curing in a continuous flow, a layout typically used for long profiles and large single-color runs. We choose the line for each order.
For severe coastal projects we normally evaluate an architectural TIGER Drylac powder system with enhanced seaside pretreatment. The powder system is confirmed for each order, so tell us the location and exposure.
Yes, on thermal break profiles. The inner and outer aluminum shells are separate pieces joined by PA66 strips, so each can be powder coated in its own color before assembly.
Yes. The factory is in Shishan Town, Nanhai District, Foshan, about 40 minutes from the Canton Fair complex in Guangzhou. See our Activity Center for the factory visit subsidy.
Work directly with a top 5 aluminum factory in China. Send your drawing or profile list with the color you need, and we reply with sections, price and lead time.
Request a QuoteWhatsApp Us
MT Flying is a China-based manufacturer of aluminum profiles, windows and doors, providing customized solutions for residential and commercial projects worldwide.
