
KY01-030 · 52 mm sash
3.0 mm nominal wall · 1.34 kg/m catalogue weight
Find the exact section. Connect with the factory.
MT Flying supplies the KY01 / 40 Series sliding door profile system directly to fabricators and importers. This official KY series reference connects model codes, original section drawings and technical catalogue data with our Foshan aluminum extrusion factory information.
Find your KY01 profileDownload technical PDF
Looking for KY01-030, KY01-041 or KY01-046? Each model below has its own drawing and reference data. Keep the full code when requesting a quote.

3.0 mm nominal wall · 1.34 kg/m catalogue weight

2.0 mm nominal wall · 1.57 kg/m catalogue weight

4.0 mm nominal wall · 1.62 kg/m catalogue weight
KY Series is this site’s series entry. KY01 is the prefix printed on the 40 Series sliding door profiles. 40 Series identifies the system family, including double-track and triple-track configurations. We preserve the original model codes rather than assigning new identifiers to existing sections.
Other KY prefixes and similar third-party catalogue numbers require a drawing comparison; this page does not claim that all KY profiles are interchangeable.
| Component | Double track | Triple track |
|---|---|---|
| Frame family | 106 mm | 159 mm |
| Example top track | KY01-043 | KY01-044 |
| Raised bottom track | KY01-003F | KY01-014F |
| Floating bottom track | KY01-009 | KY01-015 |
| Sash families | 52 / 65 / 75 mm; selected lift-slide options | |
| Reinforced interlock | KY01-046, selected with the approved sash and roller assembly | |
Source: supplied MT Flying double-track and triple-track profile sheets, page 1. The 5+15A+5 glass configuration is shown in the assemblies; glass size, loads and tolerances require project review.
Meet the team behind your supply: view our aluminum extrusion factory in Foshan, including extrusion presses, runout and cutting lines, and die storage. Our KY01 factory and sourcing page explains how to request model-specific production and quality documents.
Contact MT Flying directly through this official KY01 index. Match your profile code and section drawing, review the factory information and request production confirmation for your exact order.
Yes. The technical PDF contains selectable model codes and a model index, plus the original section references.
Do not assume this. KY01-041 is shown in the earlier general catalogue but is absent from the supplied newer selection sheet. Ask for the current approved assembly drawing before substitution.
They depend on stock, model, finish and order quantity. Request a model-specific quotation; this catalogue does not guarantee stock or a universal lead time.
Send your model code, quantity, finish, length and destination port. We will confirm the section, matching components and production requirements with your quotation.
Request KY Series on WhatsAppEmail the factory teammichael@mtflying.com · +86 15302856248
Technical index revision: 16 November 2026. Catalogue values are nominal; final supply follows the approved order drawing.