6063 and 6061 are the two alloys most buyers meet when ordering profiles. Both are 6000-series alloys, with magnesium and silicon as the main alloying elements, and both are heat-treatable. The practical difference: a 6063 aluminum extrusion gives the better surface and the more complex shape, while a 6061 aluminum extrusion gives higher strength.

6063 vs 6061 at a glance

6063 6061
Known as Architectural alloy Structural alloy
Strength Medium Higher
Extrudability Excellent; thin walls and complex hollow sections Good; simpler, heavier sections
Surface finish Very good; smooth for anodizing and powder coating Good; less uniform when anodized
Machinability Good Very good
Typical products Window and door profiles, curtain wall, trims, heat sinks Structural frames, machine parts, vehicle and marine components
Common tempers T5, T6 T6
Comparison chart of 6063 vs 6061 aluminum extrusion alloys
6063 and 6061 compared.

When to choose 6063

This is why MT Flying extrudes its window and door systems in 6063-T5. See aluminum window profiles.

Anodized and powder coated surfaces on 6063 aluminum profiles
6063 takes anodizing and powder coating with an even surface.

When to choose 6061

Cut ends of thin-wall multi-chamber 6063 aluminum window and door profiles
Thin-wall, multi-chamber 6063 sections.

What T5 and T6 mean

The temper describes the heat treatment. T5 profiles are cooled from the extrusion press and then artificially aged. T6 profiles are solution heat-treated and then artificially aged, which gives higher strength. Always state alloy and temper together on the drawing, for example 6063-T5.

Ordering

Tell the factory the application before fixing the alloy; the section design often matters more than the alloy number. Our architectural profiles run in 6063-T5, and other requirements are reviewed with your drawing. Read more in aluminum extrusion profiles, or see our aluminum extrusion factory in China.

Aluminum extrusion press producing 6063-T5 profiles
6063-T5 profiles coming off the press.

Frequently asked questions

Is 6061 stronger than 6063?

Yes. In the same temper, 6061 has higher strength than 6063. 6063 is chosen for its surface finish and its ability to form complex sections.

Which alloy is used for aluminum window profiles?

6063, usually in T5 temper. It forms thin, multi-chamber sections and finishes well.

Can 6063 be anodized?

Yes. 6063 is the preferred alloy for anodizing because it gives a uniform surface.

Need a quotation? MT Flying is a top 5 aluminum factory in China. Send your drawings or profile list through our contact page and we reply with sections, price and lead time.

Leave a Reply

Your email address will not be published. Required fields are marked *